Hollyland Mars 400S SDI/HDMI Wireless Video Transmission System
The Mars 400S from Hollyland is an entry-level 1080p60 transmitter/receiver system featuring a 400' line-of-sight transmission range. In a compact design, the transmitter and receiver each have an SDI and HDMI connection. The choice between the two connection types expands your compatibility options and also lets you grow in case currently you only need one.
Additionally, an optional second receiver can be linked up to the transmitter to accept the signal at the same time. The transmitter is also capable of sending the signal over built-in Wi-Fi to up to four mobile devices, whether it is also sending to a receiver at the time or not. This will allow different people/departments on the set to view the image being captured. The image is sent to the HollyView app, which is compatible with iOS and Android.
Both the transmitter and receiver have a built-in L-series battery plate and also support DC power. Batteries are sold separately. One power adapter is included to get you started on the receiver end. Both units also have an OLED display that confirms the resolution, transmission channel, signal strength, and other details. The display also shows a low battery warning when there are about 30 minutes of runtime left.
One of the features of the Mars 400 system is a channel scan function. Via the OLED display, you can see the status of each selectable transmission channel in the environment you're in. This feature lets you know which channels are good and which have interference. Another feature is scene mode selection, which allows you to select from three different scene modes as best suits your environment. The three modes let you prioritize between video quality, low latency, or a balance between the two.
Key Features:
- Key Features
- Entry-level 1080p60 transmitter/receiver system
- 400' line-of-sight transmission
- SDI and HDMI input
- SDI and HDMI output
- Up to two receivers supported at the same time
- Wi-Fi transmission to up to four mobile devices using iOS/Android HollyView app
- Built-in L-series battery plates
- OLED display
- Low battery warning
- Channel scan function
- Scene mode selection
Wireless
Wireless Range
400' / 121.92 m (Line-of-Sight)
Channel Bandwidth
20 MHz
Frequency Range
5 GHz
Latency
< 0.1 sec
RF Power
≤ 21 dBm
RF Sensitivity
-80 dBm
Wi-Fi
Yes
Interfaces
Transmitter Antenna Ports
2 x RP-SMA Male
Receiver Antenna Ports
2 x RP-SMA Male
Transmitter Video Connectors
1 x BNC (3G-SDI / HD-SDI) Input
1 x HDMI Input
Receiver Video Connectors
1 x BNC (3G-SDI) Output
1 x HDMI Output
Transmitter Other I/O
1 x USB Type-C
Receiver Other I/O
1 x USB Type-C
Embedded Audio
SDI
HDMI
Format Support
Video Format
SDI/BNC:
1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps
1080i at 50, 59.94, 60 fps
1080PsF at 23.98, 24, 25 fps
720p at 50, 59.94, 60 fps
HDMI:
1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps
1080i at 50, 59.94, 60 fps
720p at 50, 59.94, 60 fps
576p at 50 fps
480p at 60 fps
Display
Transmitter Panel Type
OLED
Receiver Panel Type
OLED
Power
Transmitter Battery Support
1 x Sony L-Series / NP-F Type
Receiver Battery Support
1 x Sony L-Series / NP-F Type
Transmitter Power Connector
1 x Barrel (6 to 16 VDC) Input
Receiver Power Connector
1 x Barrel (6 to 16 VDC) Input
Transmitter Power Consumption
Device: (11 W)
Receiver Power Consumption
Device: (6 W)
General
Transmitter Mounting
1 x 1/4"-20 Female
Receiver Mounting
1 x 1/4"-20 Female
Materials
Metal
Transmitter Dimensions
4.41 x 2.56 x 0.94" / 11.2 x 6.5 x 2.4 cm
Receiver Dimensions
4.41 x 2.56 x 0.94" / 11.2 x 6.5 x 2.4 cm
Transmitter Weight
0.4 lb / 192 g
Receiver Weight
0.4 lb / 189 g
Packaging Info
Package Weight
1.94 lb
Box Dimensions (LxWxH)
7.3 x 5.7 x 3.2"